Druckkraft-Wägezelle COLVIS

Stromversorgung mit Batterien und externem Ladegerät oder optional mit externer Stromversorgung und/oder RS485.

Optionales Kabel: Stecker UTS6JC10E6S, 5 Meter - 4 x 0,25 mm² für RS485 und externes Netzteil.

Zur Vergrößerung auf das Bild klicken

General precautions to be followed in the installation and assembly of load cells:

Follow the direction of application of force on the load cell
Do not exceed the limits of the temperature as indicated in the data sheet
Do not remove labels from the load cell
Adequately protect the cables with sleeves or channels
Carry out on each load cell a ground connection with suitable cable, shunt on mounting accessories
Do not carry out any welding on the mechanical structure after mounting the load cell
Avoid or reduce to a minimum level any mechanical constraints between the rigid structure and the weighing structure to avoid error in weighing and return to zero
In case of vibration or dynamic loads product the load cells with puffers / shock absorbers
Protect load cell from any dust accumulation with any appropriate means